Classifieds Photo Gallery Guestbook Chat Calendar
Home
Navigation bar


1980 Vespa P125X motor
Year/Make/Model1980 Vespa P125X motor 
DescriptionThis original Piaggio motor from a low-miles barn find Vespa was disassembled, cleaned and rebuilt over the winter using factory tools with a new stock-type replacement crankshaft, bearings, oil seals, gaskets and o-rings and other parts as needed. Also new are the engine swing arm buffer, SIP M8/M7 replacement cylinder studs (I repaired damaged case threads), new kickstart rubber buffers, and other stock hardware. The top end, gear stack, clutch and rear brake/hub also were disassembled, inspected and reassembled. This original motor had fewer than 8,000 miles prior to being rebuilt. Sale includes a cleaned Del'Orto SI 20/20D carburetor with all new gaskets, complete with a stock autolube type carb box, as well as a stock flywheel and what appears to be the original Ducati/Piaggio stator (double-yellow wire type), which needs to be rewired to suit the buyer's intentions for his/her particular scooter. Will supply new condenser and points with sale, if desired. This engine hasn't seen any ethanol gas, or oil, added since its recent rebuild, so it has not yet been re-started. It now needs very little to be installed in a new home in another scooter (it was removed from its original P125X that had frame rust.) I can supply the new stock flywheel cover, engine shroud and air bellows at additional cost with motor sale only. $675. Local pickup in Western Massachusetts only. PM me if interested. Thanks 
LocationGreenfield, Massachusetts 
Phone 
email[retreive email address]
scooter for sale
Date posted2018-05-03 20:12:34