Description | I'm getting close to complete the restoration, so I can now offload some of the spares in excess.
If interested, please contact me via email for pictures.
-MK3 Rear hub $100 - NEW SCOOTOPIA hub. This works with MK3 only - Shipped to me by mistake, I have no use for it. It's extremely well made
-New passenger floorboards $30 - These are repops of good quality, white primer, I've spot welded one of the threaded pins because it was loose, so they are ready to go.
-OEM Kickstart lever $20 - Needs to be rechromed
-New GOL Piston (Casa Lambretta) $50 - 57.4 diam., 3 rings, 16mm pin (OEM design). Bought new, never installed since I was able to source a custom 2 ring piston
-New BGM rectifier $15 - 6V - Still in the box, never used due to switching to 12V system
-Legshield $50 - Needs attention. I was planning to work on it and keep it as a spare but I will soon start another project and won't have time. Some pinholes in the floor, a couple of dents in the front, edges need to be smoothed out but all the metal is there. Already taken to bare metal. See pictures below
-Left sidepanel $30 - Needs some hammer and dolly work in few spots. It doesn't fit great, so I priced it accordingly. Metal is solid, no pinholes. Taken to bare metal on the exterior, interior has surface rust that needs to be cleaned.
-Floorboard rubbers $10 - Never installed but a little old,one has some light discoloration
-Front fender- $40 - Needs some hammer&dolly work in the front right area. It's solid, few spots of superficial rust only.
-Passenger seat $40 - powdercoated white. Original italian, has some slope to the right due to passenger seating sideways
-Complete Marelli ignition with centrifugal advance $100- Works perfectly. Includes flywheel, stator with new condenser, new spare "EFFE" points and coil. |